Ford’s V-10 engine is out there in a myriad of vans and vans. Annually and type of van or truck has a barely completely different serpentine belt configuration, as a result of parts within the system and the bodily measurement and form of the engine properly. In case your V-10 has a serpentine belt that’s fraying, cracking or losing ribs, it is best to exchange it, instantly. Anybody with basic auto repair experience can change a belt on a V-10 in lower than an hour.
Ford V-10 Engine Serpentine Belt Change Instructions
Open the hood to show the V-10. Look on the fan shroud or underside of the hood to find the serpentine belt-routing diagram. Look at the diagram to familiarize your self with the placement of the elements within the system, in addition to the belt routing path.
Transfer the serpentine belt tensioner off the V-10 serpentine belt with the serpentine belt instrument. Slide the belt to the side, so you’ll be able to slowly transfer the belt tensioner again into place, whereas leaving the belt unfastened.
Slip the V-10 serpentine belt off the opposite pulleys, by hand, and take away it from the engine nicely. Relying on the 12 months and type of the car, in addition to your bodily measurement and dexterity, you could discover it simpler to entry a number of the lower pulleys from beneath the automobile.
Wrap the brand new serpentine belt across the backside of the V-10 crankshaft pulley, by hand. Seek advice from the serpentine belt diagram, and route the belt across the different pulleys, leaving the belt tensioner pulley for final. Make sure you route the belt precisely as depicted on the belt-routing diagram.
Transfer the V-10 serpentine belt tensioner apart with the serpentine belt device. Slide the brand new serpentine belt onto the tensioner pulley, and maintain it there, whereas slowly transferring the tensioner again into place. Remove the serpentine belt instrument from the V-10 engine properly. Shut the car hood.
[taken from ehow.com]